SMTP Proxy Tidbits (SPF and Proofpoint Tweak)

[TMRT]

If you are deploying Netskope SMTP Proxy few notes of interest. (Various screenshots of interest attached).

1. If your upstream has SPF check ensure to add following record to your DNS server  so that the SPF check does not fail

_spf.goskope.com

2. To allow Netskope IP's refer to the following list

2.a If you are using Proofpoint as the upstream MTA there is a tweak to allow these IP's.

Proofpoint does not accept CIDR ranges. Also adding in CIDR notation e.g. /24 did not help in my case.

Use the following format (first 3 octets only) (screenshot attached)

163.116.128

8.36.116

NOTE: for complete list of IP's subscribe to this article. There is a table for SMTP Proxy "

Netskope Email DLP (SMTP) List for Allowlisting

The following list of IP ranges represents where SMTP traffic may egress from Netskope's NewEdge Security Cloud, and should be used for permitting traffic with upstream email providers. Netskope's recommendation is that customers' add all IP ranges when configuring allowlisting with email providers. If a tenant is assigned to a specific region (other than the global region), then only the relevant range(s) in the table below require allowlisting.

Global (default)	All DCs below	All prefixes below	All ranges below
North America	San Jose, CA, USA (SV5)	8.36.116.0/24 163.116.128.0/24	8.36.116.0 - 8.36.116.255 163.116.128.0 - 163.116.128.255
North America	San Jose, CA, USA (SJC1)	163.116.131.0/24	163.116.131.0 - 163.116.131.255
Europe	Frankfurt, Germany (FR4)	8.39.144.0/24 163.116.160.0/24	8.39.144.0 - 8.39.144.255 163.116.160.0 - 163.116.160.255
Europe	Amsterdam, Netherlands (AM2)	31.186.239.0/24	31.186.239.0 - 31.186.239.255
Oceania	Melbourne, Australia (MEL2)	163.116.206.0/24	163.116.206.0 - 163.116.206.255

Proofpoint-Block-PolicyNetskope-SMTP-PolicyProofpointSMTP-Netskope

[Community_Team]

This is great information if you are looking to deploy Netskope SMTP Proxy, thank you @TMRT for sharing! Keep those Tidbits coming!

[hhamza]

Hi @TMRT I am in the process of configuring netskope and proofpoint for smtp header - appreciate if you could send me any sample configuration or artciles that will help me set up - Thanks!